Aftermarket android head unit installation

Useful How To posts
Post Reply
Posts: 1
Joined: Sat Jun 27, 2020 5:03 pm

Aftermarket android head unit installation

Post by Alekias » Sat Jun 27, 2020 5:19 pm

Hi all,

I'm new to the forum, even if I've looked to some topic about various things in the past and I must say I've always found very good information about what I was looking for!
Since my Intellilink touch screen died and the cost for replacement was really high I decided to consider to install an aftermarket chinese android unit (Klyde ... 2fcaVbgkt7).
The unit should have been plug and play, but I found out it is not, the cable they sent me is completely wrongly cabled and also caused the blown of a fuse when I plugged it as they suggested.
I now have the dash completely disassembled and I'm trying to figure out how to fix the situation, but I cannot find any wiring diagram of the infotainment Delphi siver-box connections (p/n 28493719).
I saw on the forum some information about the speakers connections (green connector that I called A in the picture below), but I couldn't fine anywhere information about the other wires (connectors B and C)


I was hoping someone here that has had my same problem could help with that!
I've also made an excel table to better describe how the wires look like.

Cattura 2.JPG

I thank in advance everyone that will look into that!

Post Reply