I had to look at the picture a bit closer to realise that was the case.
The boot lights I have didn't fit, but I ordered new bulbs last night and they should be here today for me to fit before travelling up north.
Regarding the resistor, is it a case of just solder it onto the feed or do you have to cut a bit off?
My Astra K SRI
-
davidw
- Posts: 227
- Joined: Sun Jan 22, 2017 8:58 am
- Astra Model: 1.6T Elite Nav
- Astra Colour: Cosmic Grey
- Location: Oxfordshire, UK
Re: My Astra K SRI
Astra Hatchback Elite Nav |1.6i Turbo | 200 bhp | Cosmic Grey | Intellilux Matrix Headlights | Dark Rear Windows | Keyless Entry | Sports Seats (AGR - Approved) | Front and Rear Parking Sensors
-
jt123
- Posts: 345
- Joined: Mon Mar 06, 2017 9:49 pm
- Astra Model: 2016 - 1.6 CDTI SRi
- Astra Colour: Carbon Flash
Re: My Astra K SRI
If you're going for those resistors I linked, they come with wires and connections attached. I cut the wires off so then you just have the bare connections on the resistor. I then soldered a separate short piece of wire on both sides of the resistor to the cluster (one to positive side and one to negative)davidw wrote: ↑Sun Jun 04, 2017 8:42 amI had to look at the picture a bit closer to realise that was the case.
The boot lights I have didn't fit, but I ordered new bulbs last night and they should be here today for me to fit before travelling up north.
Regarding the resistor, is it a case of just solder it onto the feed or do you have to cut a bit off?
-
davidw
- Posts: 227
- Joined: Sun Jan 22, 2017 8:58 am
- Astra Model: 1.6T Elite Nav
- Astra Colour: Cosmic Grey
- Location: Oxfordshire, UK
Re: My Astra K SRI
Does doing that bypass the normal connections then? Is it as simple as that?
Astra Hatchback Elite Nav |1.6i Turbo | 200 bhp | Cosmic Grey | Intellilux Matrix Headlights | Dark Rear Windows | Keyless Entry | Sports Seats (AGR - Approved) | Front and Rear Parking Sensors
-
davidw
- Posts: 227
- Joined: Sun Jan 22, 2017 8:58 am
- Astra Model: 1.6T Elite Nav
- Astra Colour: Cosmic Grey
- Location: Oxfordshire, UK
Re: My Astra K SRI
I've just had a look at the way it goes together, seems quite simple, the only thing is will it invalidate the warranty? I need to take it in for a condensation claim as I've just found a pool of water in the light.
Astra Hatchback Elite Nav |1.6i Turbo | 200 bhp | Cosmic Grey | Intellilux Matrix Headlights | Dark Rear Windows | Keyless Entry | Sports Seats (AGR - Approved) | Front and Rear Parking Sensors
-
jt123
- Posts: 345
- Joined: Mon Mar 06, 2017 9:49 pm
- Astra Model: 2016 - 1.6 CDTI SRi
- Astra Colour: Carbon Flash
Re: My Astra K SRI
I would wait until that is sorted before you do soldering... I'm not too sure about the warranty but I wouldn't risk it. I'm sure they'll look for any reason possible to invalidate warranties
-
jt123
- Posts: 345
- Joined: Mon Mar 06, 2017 9:49 pm
- Astra Model: 2016 - 1.6 CDTI SRi
- Astra Colour: Carbon Flash
Re: My Astra K SRI
Update:
Fitted Dual Rear USB outlets today
Ambient Door LED's from the Elite is another job for tomorrow.
Fitted Dual Rear USB outlets today
Ambient Door LED's from the Elite is another job for tomorrow.
-
Scotty_b
- Posts: 753
- Joined: Tue May 30, 2017 9:11 pm
- Astra Model: 1.4T 150 Sri
- Astra Colour: Summit White
Re: My Astra K SRI
Do you have a link to the bee sting aerial? The thread on the one from my Astra H is too small.
Astra K 1.4T 150 SRi, Summit white. De-Chromed with gloss black.
