Hello!
Both have the same code - 8654382.
They are tightened with a force of 12 Nm

 

Thank you Zootv

 

Where do you find the torque force for the bolts? Iv just put together my Egr cooler unit and used a torque spanner as best as I could before “feeling” too much tension prior to possibly snapping. I couldn’t find torque numbers anywhere

 

https://www.astrakforums.co.uk/threads/1-6d-engine-torque-settings.12556/

 

For the specific plugs on the gearbox, I saw in a video that such a tightening force is required. Otherwise, it is most accurately in the service manual, which I do not have. Tightening in aluminum elements of bolts with a 6 to 8 mm thread is done with a force between 8 and 12 nm.